Features

Technical Features

2K, DTM, polyacrylic anticorrosive enamel with very good adhesion and suitable for direct application to iron and galvanized steel. The coating has a semi-glossy finish and it is highly resistant to water, chemical and atmospheric agents. The product is suitable also as dust-repellent treatment for indoor and outdoor floors with a decorative effect; it can be used for floors subjected to pedestrian passage and light traffic with forklifts and trolleys with rubber wheels. The product was tested according to the ministerial decree 239/89 relating to the BCRA method which measures the coefficient of dynamic friction in order to verify the resistance to slipperiness on the cement substrate.

Application Field

Polyacrylic enamel suitable as DTM, semi-glossy primer and final coat with good anticorrosive properties for metal supports when short coating time is requested. The product is ideal for robots, industrial automation systems, parts and components of the ACE sector when high productivity and fast handling of the coated substrates are required. It can also be applied on outdoor concrete floors.

Data

Theoretical average spreading rate6 m²/kg each coat at the dry film thickness of 60 µ
ApplicationSpray, Roller, Brush
Dilution5-10% with Slow Thinner for Acrylics Series D0020
Gloss50 - 60 gloss
Wet film thickness each coat130 µ
Dry film thickness each coat60 µ
N° of coats1 or 2 coats till reaching the total, suitable thickness
Total dry film thickness100 µ
Theoretical average consumption165 g/m²

Catalysis

hardener ps5 series l0025

Catalysis20% by weight (100 + 20)
UseSlow, non yellowing for outdoor use
Pot life at 20°c6 hours
Package1 l - 5 l

hardener ps7 series l0065

Catalysis25% by weight (100 + 25)
UseFast, non yellowing for outdoor use
Pot life at 20°c6 hours
Package0,5 l - 1 l - 5 l

hs plus 420 hardener series 1392

Catalysis15% by weight (100 + 15)
UseFor roller applications on concrete
Pot life at 20°c3 hours
Package1 l - 2,5 l - 5 l

Application

airbrush - cup gun

Viscosity25'' - 45'' Ford Cup 4
Noozle1,4 - 1,7 mm
Pressure3,5 - 4 bar
Notes-

airmix

ViscosityDepending on the application criteria
Noozle11 - 13
Pressure60 - 100 bar
Notes-

roller and brush

Viscosity-
Noozle-
Pressure-
NotesDilution at 5% with Slow Thinner for Acrylics Series D0020

electrostatic

Viscosity-
Noozle-
Pressure-
NotesKeep in touch with the technical support to choose the suitable antistatic additive

Drying

Overcoating interval4 - 96 hours (after it is necessary to sand)
Air drying20°C - 25°C
Dust-free drying10 - 15 minutes
Dry to touch30 - 40 minutes
Dry through1 - 2 days
Full cure14 days
Flash off5-10 minutes at 20°C
Stoving drying30 minutes at 50-60°C
Resistance to temperature80°C

Bases

binder

Base packaging15 kg, 3 kg
Colored packaging20 kg, 4 kg
% Mixing ratio75 - 25

white base

Base packaging3.8 kg, 19 kg
Colored packaging4 kg, 20 kg
% Mixing ratio95 - 5

FOSFACRYL SEMI-GLOSSY

Series 0161

2K, DTM, semi-glossy, polyacrylic enamel

High adhesion Excellent surface hardness Resistance to aggressive agents For concrete floors Interior use Exterior use Colorable product Slip resistance

General Information

System: Two pack - 2K Nature: Solvent-based Packages: 4 kg - 20 kg Tinting service: Can be colored with solvent-based colorants Unisol Pro Series 0200 Suitable Substrates: Iron, Cast iron, Galvanized surfaces, Light alloys, Aluminum, Thermoplastics (ABS, PVC, PC), Fiberglass and Thermosetting plastics, Cement, Sandblasted Iron - Sandblasting Sa 1-2, Sandblasted Iron - Sandblasting Sa 2,5-3, Hot-dip galvanization Color fans and color cards: Ral 841 GL, Ncs 1950, Color Box, 1040 Pro-Industrial Bodywork