Features
Technical Features
1K enamel specific for swimming pools; the product is based on chlorinated rubber polymers, is fast drying and has excellent resistance to water. The product is resistant to common sanitizers used for the swimming pool maintenance.
Application Field
Specific enamel based on special chlorinated rubber polymers suitable for painting swimming pools in cementitious material and in fiberglass. For roller applications, the product can only be diluted with synthetic thinner. The product can be applied directly on cementitious substrates without the use of a specific adhesion promoting primer. In case of fiberglass, the specific epoxy primer must be used to ensure perfect adhesion.
Data
Theoretical average spreading rate3,9 m²/kg each coat at the dry film thickness of 80 µ
ApplicationRoller, Brush
Dilution30–40% with Synthetic Thinner Series D0005
Gloss80 – 85 gloss
Wet film thickness each coat217 µ
Dry film thickness each coat80 µ
N° of coats1 or 2 coats till reaching the total, suitable thickness
Total dry film thickness100 µ
Theoretical average consumption260 g/m²
Application
roller and brush
Viscosity-
Noozle-
Pressure-
NotesDilution 30–40% with Synthetic Thinner Series D0005
Drying
Overcoating interval24 hours
Air drying20°C – 25°C
Dust-free drying10 – 20 minutes
Dry to touch1 – 2 hours
Dry through24 – 36 hours
Full cure10 days
Flash off-
Stoving drying-
Resistance to temperature-
POOLDAM
Series 0029
Chlorinated rubber enamel specific for the protection of swimming pools
Water resistance
Excellent adhesion to concrete
Fast drying
General Information
System: One pack - 1K
Nature: Solvent-based
Packages: 4 l – 20 kg/L
Colors ready in stock: Light Blue Pantone 299C, White RAL 9016
Suitable Substrates: Cement